The GraFix® Cruciate Reconstruction System is designed to facilitate arthroscopic anterior cruciate ligament reconstructions. Using the Linvatec Pinn-ACL® Cruciate Guide and Bullseye® Femoral Guide, this system enables the surgeon to accomplish precise, reproducible guide pin and subsequent tunnel placement. The 2-Pin Passer allows for parallel interference screw placement alongside the graft without divergence. Linvatec interference screws are available in the most complete variety of sizes, materials and configurations to accommodate all preferences.

SE™ Graft Tensioner

Pinn-ACL^® Guide

Bullseye^® Femoral Tunnel Preperation

Preparation Table

Dilators

Modular Drive System

PCL Instrumentation

Pinn-ACL® Guide The Pinn-ACL Guide can be used to create tibial tunnels of known lengths with a variable angle adjustment of 35 to 60 degrees with the use of a graduated pin-sleeve. Feature a patented collet locking mechanism for precise, fingertip control of pin-sleeve placement. The guides' pin-sleeves are graduated to precisely determine tunnel length prior to drilling. Femoral guides are offered in right and left versions and are designed to easily accommodate unusually large or small knees. Catalog #  Description 8731 8205 8206 8207   Pinn-ACL Tibial Guide (includes ACL guide arm and pin-sleeve) Pinn-ACL Femoral Guide, right Pinn-ACL Femoral Guide, left Femoral Guide Introducer

Return to Top

Bullseye® Femoral Tunnel Preperation   Simplifies isometry verification using anatomical landmarks in 5mm to 8mm sizes.       Catalog # Description C8650  C8660 C8670 8680A   5mm Femoral Guide (requires 9744 guide pin) 6mm Femoral Guide (requires 9744 guide pin) 7mm Femoral Guide (requires 9744 guide pin) 8mm Femoral Guide (requires 9744 guide pin)

Return to Top

Preparation Table This fully modular system plays a key role during ACL and PCL reconstructive surgeries to prepare soft tissue and bone-tendon bone autografts or allografts. The system allows the surgeon to interchange the various components to clean, whipstitch, measure, pre-tension or add a fixation device. This working platform incorporates a sizing block, sold separately, that is removable for cleaning or sizing a graft under pre-tensioning. The sizing block can accommodate grafts from 3.0mm to 13mm in .5mm increments. The universal Slide Locks allow for any of the graft preparation table components to be changed intraoperatively, easly and quickly. The Slide Locks are also fully adjustable via the spring loaded locking button, for one handed adjustments. The Tension Clamp is etched in both pounds ( 30 lbs. max. ) and newtons ( 120 N max ) for quick referencing during pre-tensioning of the graft for those surgeons who feel it is necessary for satisfactory post-op results.The Graft Clamps are designed to act as an extra set of hands and incorporate atraumatic teeth to prevent damage to the graft Catalog # Description PS8820 PS8821 PS8822 PS8823 PS8824 PS8825 PS8826 PS8829 PS8830 PS8832   Graft Preparation Table Slide Lock (2 recommended) Soft Tissue Graft Clamp Suture Holder Clamp Tension Clamp Holder Clamp and Endobutton Bone-Tendon-Bone Clamp Bone Block Drill Guide Scraping Board Sizing Block

Return to Top

Tunnel Dilator System This fully modular system plays a key role during ACL and PCL surgeries, improving soft- tissue graft fixation within a femoral or tibial tunnel. By compacting cancellous bone within the femoral and tibial tunnels, the result of a higher pullout strength for soft-tissue grafts when used in conjunction with interference screws. Features: Dilators:   Tapered ends allow for easy insertion and removal of the dilators from the femoral or tibial tunnel. Full radius depth marks from 10mm to 40mm in 5mm increments. T-Handle: Ergonomic styling allows for an easy grip and maneuverability. Built in locking quick connector, allows for easy intraoperative changing as well as minimizing the potential for the units to separate during use. Fully cannulated to 2.45mm diameter. Slaphammer: Ensures that the forces delivered to the dilator will be applied inline with the guide pin, thereby eliminating divergence during dilation. Fully cannulated to allow the assembly to be placed over guide pins up to 2.45mm diameter. Catalog # Description TD8501 TD8502 TD8504 TD8506 TD8506.5 TD8507 TD8507.5 TD8508 TD8508.5 TD8509 TD8509.5 TD8510 TD8510.5 TD8511 TD8511.5 TD8512   Tunnel Dilator T-Handle Tunnel Dilator Slap-Hammer Tunnel Dilator Sterlization Case Tunnel Dilator 6.0mm Tunnel Dilator 6.5mm Tunnel Dilator 7.0mm Tunnel Dilator 7.5mm Tunnel Dilator 8.0mm Tunnel Dilator 8.5mm Tunnel Dilator 9.0mm Tunnel Dilator 9.5mm Tunnel Dilator 10.0mm Tunnel Dilator 10.5mm Tunnel Dilator 11.0mm Tunnel Dilator 11.5mm Tunnel Dilator 12.0mm

Return to Top

Modular Drive System The modular system provides the necessary tools to insert or remove Linvatec bioabsorbable or metal interference screws during ACL and PCL reconstruction. The handle and attachable shafts provide a cost effective alternative to expensive drivers and other necessary instruments. Large, ergonomic ratcheting handle for simple screw insertion and removal. Quick connect makes intraoperative shaft changing easy and quick. Thin and regular shaft diameters can accomodate all tunnel sizes, screw placements and entry approaches. Catalog # Description D8640 D8626 D8627 D8630 C8716 D8635 D8636 D8637 D8638   Ratcheting Handle 3.5mm Straight Hex 3.5mm Thin Shaft Hex 2.5mm Hex Bioscrew® Universal Driver (for use with all Bioscrew® interference scews) EZ-In EZ-Out 7mm Tap 8mm Tap

Return to Top

PCL instrumentation The PCL Guide Pin. Allows advancement with a proactive stop to prevent drilling beyond the tibia and into neurovascular structures. Catalog # Description C8732 C8728 C8729 C8734 C8735 C8736 C8737 C8001   PCLGuide Arm ( for use with 8731 ) PCL Pin- Sleeve PCL Guide Pin, etched ( 5 per box ). Tunnel Rasp, fine 9mm Tunnel Rasp, course 9.5mm PCL Curved Rasp PCL Curved Currette Pinn ACL Insert Tray with Lid